Brultech Greeneye Monitor Bedienungsanleitung PDF herunterladen (Seite 42)

Quick Start

 Page 41

QUICK START TEMPERATURE

Pre-Condition

One or more “1-Wire” temperature sensor is connected to the GEM.

Steps

1. Enter the web setup page and click the “Temperature” menu.

2. Select the “Enable Checkbox” for the number of connected sensors beginning with channel 1.

For example, if two sensors are used, channel 1 and 2 will be checked and channels 3 to 8

unchecked.

3. Select F or C units and click “Save”

4. Click the “Search, List, Save all sensors codes” radio button then click “Go”. This step will

discover all sensor ROM codes and assign them to the enabled channels.

5. Click the “Watt” menu to view the temperature value. It will take up to 64 seconds to update all

temperatures so please be patient.

QUICK START PULSE COUNTER

Pre-Condition

One or more pulse signals are connected to the GEM

Steps

1. Select “Advanced” Menu and click “Reset Pulse Counters”

2. Click the “Watt” menu and observe the pulse counter values. Remember that this page is

refreshed every 8 seconds therefore the pulse count will reflect all pulse counts sensed during

the 8 second interval.

1 2 ... 37 38 39 40 41 42 43

Keine Kommentare

Brultech Greeneye Monitor Bedienungsanleitung Seite 42