Brultech Greeneye Monitor Bedienungsanleitung PDF herunterladen (Seite 31)

Advanced Menu

 Page 30

ADVANCED MENU

Figure 33

OVERVIEW

The “Advanced” menu section consists of various commands and provides the option to change various

settings. Some settings should only be made providing the user has a good understanding of the

function.

ADVANCED COMMANDS BLOCK 1

Figure 34 shows the first block of advanced commands. Each is described below.

 “Reset WiFi Module” (1) sends a hardware reset signal to re-boot the communication module

connected to COM1. Although labeled as “Reset WiFI”, this function will reset the Ethernet

module for “Ethernet Only” options

 “Reset ZigBee” (2) sends a hardware reset pulse to the “XBee” module if one is installed

 “Reboot COM” (3) reboots the GEM’s main processor

 “Reboot ENG” (4) reboots the power metering section of the GEM

 “Reset Watt-Seconds and Seconds” (5) resets the incremental watt-second counter and three

byte seconds counter

 “Reset Pulse Counters” (6) zeros the incremental count value of all four pulse counter inputs

 “Reset All Counters” (8) zeros the following incremental values:

o Watt-second counters

o Seconds counter (unrelated to the calendar clock seconds)

o Watt-hour counters

o Minute counter (unrelated to the calendar clock minutes)

o Pulse counters

Figure 34

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Keine Kommentare

Brultech Greeneye Monitor Bedienungsanleitung Seite 31